China power transformer in substation Manufacturer, Supplier, Factory

The 35kV 35KV PV Pad mounted Transformer is a combination transformer used for wind or photovoltaic power generation, which integrates a step-up transformer, high-voltage current limiting fuse, load switch, low-voltage switchgear, and corresponding auxiliary equipment. The capacity range is 500-6800KVA, and the voltage level is 35kV and below. It is suitable for various types of onshore, pond, and offshore photovoltaic and wind power plants.

40.5KV 1600 amp Outdoor high-voltage SF6 circuit breaker is a three-phase AC 50HZ outdoor high-voltage switchgear suitable for the control and protection of 40.5KV transmission and transformation systems. It can also be used as a connecting circuit breaker and a combination of opening and closing devices. The LW8-40.5AG circuit breaker adopts the principle of "thermal expansion+auxiliary blowing" intelligent extinguish arcs, equipped with a CT10 spring operating mechanism. The circuit breaker complies with GB/T1984-2014 "AC High Voltage Circuit Breakers" and meets the requirements of the International Electrotechnical Commission standard IEC62271-100:2001 "High Voltage Switchgear and Control Equipment - Part 100: High Voltage AC Circuit Breakers".

The 11KV 2000amp Vertical break two post isolating switch is a composite-structured 12KV switch designed for outdoor line networks. Equipped with a CS-type operating mechanism, it effectively prevents incorrect operations, such as interlocking with live conductors and composite flash-locks. This negates the necessity for an additional earthline, providing a convenient and efficient solution. Furthermore, the pollution-proof isolating switch is particularly well-suited for use in heavily contaminated areas, effectively addressing shed pollution during operation and ensuring a clean and safe working environment.

The 72.5KV Outdoor high-voltage SF6 open type combination electrical appliances stands out as an integrated electrical device specifically designed for high-voltage power transmission and distribution systems. Its unique composition includes circuit breakers, disconnectors, earthing switches, current transformers, voltage transformers, and surge arresters, all enclosed in a metal housing filled with sulfur hexafluoride (SF6) gas, a highly effective insulating medium.

The SC(B) series epoxy resin dry-type transformer has been meticulously designed to prioritize safety. Its flame-retardant, fire-proof, and explosion-proof features ensure the highest level of safety. The encapsulated winding allows for direct installation in the load center, providing a maintenance-free and pollution-free solution. The scientific and rational design, in combination with the casting process, yields a product with lower partial discharge, reduced noise, and superior heat dissipation capacity. When equipped with forced air cooling, it can operate for extended periods under a 125% rated load.

The 126KV 1600A Outdoor high-voltage SF6 tank circuit breaker is a sophisticated electrical switching solution designed to safely disconnect high-voltage electrical paths in emergency situations or for regular maintenance. It employs sulfur hexafluoride (SF6) gas as a fire-suppressing and insulating agent, housed within a hermetically sealed container. This particular type of circuit breaker is purpose-built for exterior installation in electrical substations and power distribution systems.